Hindon Corp.

ELDROŽ
Electrohydraulic
Thrusters
Technical Data

Ed 23/5, Ed 30/5, Ed 50/6, Ed 80/6, Ed 50/12, Ed 80/12
	Performance In Service Depending On Ambient Temperatures
	Temperature Range	Hydraulic Fluid	Performance In Service
	-25°C to + 50°C	HL 10, DIN 51524, part 1	In the lower range of ambient temperatures the lifting times may increase up to four times the specified lifting times when the unit is operated the first time. The lowering times remain unaffected.
	over +50°C	Special fluid	Inquire
	below -25°C*	Special, low temperature fluid.	Space heater not required.
	below -25°C*	HL 10, DIN 51524, part 1	Space heater required in unit. Connect up heater in terminal box using an additional Pg 16 cable gland. 220 or 110 volt connected voltage. Thermostatic control to be provided by customer.

Type	Lifting Force N	Stroke mm	Thrust N cm	Brake Spring Force (c - spring)* N	Power Consumption** W	Current Consumption at 380 V** A	Duty Rating at S3 - 60% Duty Cycle*** c/h	Weight kg
Short Stroke Units
Ed 23/5	220	50	1100	180	165	0.5	2000	10
Ed 30/5	300	50	1500	270	200	0.5	2000	14
Ed 50/6	500	60	3000	460	210	0.5	2000	23
Ed 80/6	800	60	4800	750	330	1.2	2000	24
Ed 121/6	1250	60	7500	1200	330	1.2	2000	39
Ed 201/6	2000	60	12000	1900	450	1.3	2000	39
Ed 301/6	3000	60	18000	2700	550	1.4	1500	40
Long Stroke Units
Ed 50/12	500	120	6000	-	210	0.5	1200	26
Ed 80/12	800	120	9600	-	330	1.2	1200	27
Ed 121/12	1250	120	15000	-	330	1.2	1200	39
Ed 201/12	2000	120	24000	-	450	1.3	1200	39
Ed 301/12	3000	120	36000	-	550	1.4	900	40
All technical data are mean values related on +20°C operating temperature of unit. * Values of braking force apply to 1/3 of the rated stroke. Values at the end position of piston. During lifting operation the specified values multiply. At -25°C operating temperature of unit the current consumption is apprx. 1.5 times the current consumption at +20°C. *Continuous operation S1 and intermittent service S3 permitted up to +50°C ambient temperature.

Performance In Service Depending On Ambient Temperatures			Ed 121/6, Ed 201/6, Ed 301/6, Ed 121/12, Ed 201/12, Ed 301/12
Temperature Range	Hydraulic Fluid	Performance In Service
-25°C to + 50°C	HL 10, DIN 51524, part 1	In the lower range of ambient temperatures the lifting times may increase up to four times the specified lifting times when the unit is operated the first time. The lowering times remain unaffected.
over +50°C	Special fluid	Inquire
below -25°C*	Special, low temperature fluid.	Space heater not required.
below -25°C*	HL 10, DIN 51524, part 1	Space heater required in unit. Connect up heater in terminal box using an additional Pg 16 cable gland. 220 or 110 volt connected voltage. Thermostatic control to be provided by customer.

Š 1997, Hindon Corp.
Š 1997, Website Design, The LAD Group